The effect of hydrodynamic cavitation on performance of the alkaline aluminosilicate coatings for metal structures

Authors

  • Sergii GUZII 1 1 Scientific Research Institute for Binders and Materials, Kyiv National University of Construction and Architecture, Kyiv, Ukraine
  • Pavel KRIVENKO 1

DOI:

https://doi.org/10.18063/msacm.v2i1.696

Keywords:

alkaline aluminosilicate binder, hydrodynamic cavitation, nanostructuring, zeolites

Abstract

Load-bearing metal structures working in atmospheric conditions are exposed to corrosion. Known-in-the art paint-and-lacquer protective coatings can provide protection of metal for rather short period of time (5…10 years). These structures can be effectively protected by more advanced coatings of new generation, namely: alkaline aluminosilicate binder-based coatings of barrier type. These binders differ from the known-in-the-art binding materials by formation in their hydration products of zeolite-like minerals and feldspathoids. The paper discusses principles laid down in formulating the binder composition in the (хК, уNa)2OAl2O3nSiO2mH2O system, target synthesis of hydration products of the binder matrix under influence of dynamic of the binder matrix in cavitation, optimal parameter order to synthesis of cavitation treatment aimed at nanostructuring of zeolite-like and hydromica phases after solidification. These coatings exhibit high corrosion resistance, high adhesion to metal substrate and durability results of restoration works that had been carried out in December 2010 of the Big Bell Tower of the Kiev Petchersk Lavra in order to protect corroded metal surfaces by applying the aluminosilicate binder-based coatings, the major constituent (binder) of which was represented by (0.72Na2O+0.28K2O)1.5Al2O3(4.56)SiO217.5H2O are discussed in details. In 2016, after 6 years of service in high humidity conditions and other aggressive exposures, the coated metal structures were examined and no sign of corrosion of metal substrate and damage of the applied coating was found.

References

I Andreev. Corrosion of metals and their protection. Kazan, Tatar publishing house, 1979.

AA Gerasimenko. Protection against corrosion, aging and biodegradation of machinery, equipment and structure. Mashinostroyeniye, Moscow, 1987; 1.

GG Uhlig, RU Revie. Corrosion and fight against it. Leningrad, Khimiya, 1989.

VI Safronchik. Corrosion protection of building structures and technological equipment. Stroyizdat, Leningrad, 1988.

FN Suleymanov. Development activities and fireproof materials to ensure fire safety in the oil and gas facilities. PhD Thesis: 05.26.06. UGNTU, 2001.

NV Yeryomina. Flame retardant compositions based on liquid glass and mechanically activated oxides of aluminium and magnesium. PhD Thesis, 2007.

PG Komokhov. The sol-gel as concept of a cement composite nanotechnology, system structure and ways of its realization. J. Building Materials 2006; (9): 14–15. (in Russian).

H Schmidt. Inorganic-organic composites for optoelectronics. Springer US, on Sol-Gel Optics 1994; 451–481.

EI Yevtushenko. Activation processes in building materials technology. V.G. Shukhov State Technological University, 2003.

ТМ Vitenko. Mechanism and kinetics of intensifying action of hydrodynamic cavitation in chemical and technological processes. DSc (Eng) Thesis, 2008 (in Ukrainian).

GS Khodakov. Fine crushing physics: monograph. Nauka, 1972 (in Russian).

IМ Fedotkin, IS Gulyi. Cavitation: cavitation engineering, their use in industry (theory, calculations and designs of cavitation devices). Poligrafknika, Part I, 1997.

IM Fedotkin, IS Gulyi. Cavitation: cavitation engineering, their use in industry (theory, calculations and designs of cavitation devices). OKO JSC, Part II, 2000 (in Russian).

IM Fedotkin, AF Nemchin. Application of cavitation in technological processes. Vysshaya Shkola Publishing House of the Kiev National University, 1984.

CJ Brinker, GW Scherer. Sol-gel science: The physics and chemistry of sol-gel processing. Academic Press, 1990.

HJ Abdullah Al Musa, SG Guzii. Process for receipt of geocement coatings in the fields of hydrodynamic cavitation. Proc. of the ІІ International scientific and technical conference “Energy-efficient machinery and technology” 2015; 25–26 (in Russian).

PV Krivenko. Elaboration of physical and chemical grounds of targeted synthesis of inorganic binders in the system Na2O-Al2O3-SiO2-H2O for production of environmentally friendly intumescent materials. Stroitelstvo Ukrainy Journal (Construction of Ukraine). 1997; (2): 46–49 (in Ukrainian).

PV Krivenko. Fireproof coatings based on alkaline aluminium silicate systems. Developments in Strategic Materials. Ceramic Engineering and Science Proceedings 2009; 29(10).

SG Guzii, SA Terenchuk. Studies of the physical properties of alkali aluminosilicate suspensions after cavitation treatment. News NTU "KPI". Thematic issue "Chemistry and chemical technology in ecology", NTU "KPI" 2010; (65): 119–126 (in Russian).

PV Kryvenko, SG Guziy. Abdullah Al Musa J. Effect of Cavitational Treatment on Nanostructuring of Alkali Aluminosilicate Dispersions. VI Int. Conf. on Nano-Technology in Construction (NTC 2014), Cairo, Egypt. 2014; 52–64.

PV Krivenko. Influence of cavitation treatment at rheokinetic properties of alkali aluminosilicate dispersions. News ODABA. Zovnіshreklamservіs 2015; (57): 65–72 (in Russian).

P Krivenko, S Guziy, J Abdullah Al Musa. The Influence of Cavitation Treatment On Amorphization of Kaolinite in the Dispersion of the “Kaolin-Na2O.nSiO2.mH2O-NaOH-H2O” Composition”. Calcined Clays for Sustainable Concrete, RILEM Bookseries 2015; 387–394.

VN Semushin. X-ray detector of zeolites. Nauka Publishing House, 1986 (in Russian).

GI Ovcharenko. Zeolites in building materials. Altai State Technical University Publishing House, 2000 (in Russian).

DW Breck. Zeolite molecular sieves: Structure, chemistry and use. Wiley, 1973.

IA Belitsky. Thermographic study of zeolites. In Proceedings for Genetic and Experimental Mineralogy 1972; (7): 255–309 (in Russian).

SG Guziy. Features of processes of structuration of binders compositions in the system “xNa2O∙yAl2O3∙nSiO2∙mH2O. On Proc. of XII symposium on science and Research in the Silicate chemistry, Chemistry of Non Silicate Binders and Technology Application SILICHEM, Brno 2007; 35–41.

SG Guziy. Research of a microstructure of an artificial stone of a binder composition in system xNa2OyAl2O3nSiO2mH2O. Non-traditional Cement&Concrete III. proc. of the Int. Symp., Brno University of Technology 2008; 312–319.

SG Guzii. Alkali aluminosilicate binding compositions based on soil silica: fundamentals of synthesis, technology for production and application. Scientific and Practical Conference “High-temperature materials and technologies in the 21st century”, D. Mendeleev University of Chemical Technology of Russia, November 2008.

PV Krivenko, SG Guziу, JHA Al Musa. Atmospheric Corrosion Protection of Metallic Structures Using Geocements-based Coatings. Solid State Phenomena 2015; (227): 239–242.

S Guzii, JHA Al Musa. Study adhesive properties on aluminosilicate-based coatings of barrier-type. Technology Audit and Production Reserves 2016; 4/4(30): 13–17.

P Krivenko, S Guziy. Aluminosilicate coatings with enhanced heat-and corrosion resistance. Applied Clay Science 2013; (73): 65–70.

Downloads

Published

2018-08-16

Issue

Vol 2 , No 1 (Published)

Section

Original Research Articles

License

Authors contributing to Whioce Publishing Pte. Ltd. agree to publish their articles under the Creative Commons Attribution-Noncommercial 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, that the work is not used for commercial purposes, and that in the event of reuse or distribution, the terms of this license are made clear.