Design of broadband metamaterial-based ferromagnetic absorber
DOI:
https://doi.org/10.18063/msacm.v2i3.736Keywords:
Ferromagnetic, metamaterial, absorber, broadband, polarization insensitiveAbstract
In this paper, a metamaterial-based ferromagnetic absorber has been designed at microwave frequencies. The proposed absorber is composed of a periodic array of stacked circular ferromagnetic patches fabricated on the FR4 substrate. With the ferromagnetic property, the single-layer patch array generates a good resonant absorption mode. By stacking multiple ferromagnetic patches, the designed absorber with the absorption above 90% has a wide absorption bandwidth from 10 to 21 GHz. Due to the symmetric structure, the proposed absorber is polarization insensitive. At oblique incident with the incident angle of 45o, the good absorption more than 80% can be achieved in the whole operation band.References
Watts CM, Liu X, Padilla WJ. Metamaterial electromagnetic wave absorbers. Advanced Materials 2012; 24: 98-120.
Landy NI, Sajuyigbe S, Mock JJ, et al. Perfect metamaterial absorber. Physical Review Letter 2008; 100: 207402.
Li L, Yang Y, Liang CH. A wide-angle polarization-insensitive ultra-thin metamaterial absorber with three resonant modes. Journal of Applied Physics 2011; 110: 063702.
Zhai H, Li Z, Li L, et al. A dual-band wide-angle polarization-insensitive ultrathin Gigahertz metamaterial absorber. Microwave and Optical Technology Letters 2013; 55: 1606-1609.
Shang Y, Shen Z, Xiao S. On the design of single-layer circuit analog absorber using double-square-loop array. IEEE Transactions on Antennas and Propagation 2013; 61: 6022-6029.
Ding F, Cui Y, Ge X, et al. Ultra-broadband microwave metamaterial absorber. Applied Physics Letters 2012; 100: 103506.
Li L, Xi R, Liu H, et al. Broadband polarization-independent and low-profile optically transparent metamaterial absorber. Applied Physics Express 2018; 11: 052001.
Shi Y, Li YC, Hao T, et al. A design of ultra-broadband metamaterial absorber. Waves in Random and Complex Media 2017; 27: 381-391.
Costa F, Monorchio A, Manara G. Analysis and design of ultra thin electromagnetic absrobers comprising resistive loaded high impedance surfaces. IEEE Transactions on Antennas and Propagation 2010; 58: 1551-1558.
Chen X, Li Y, Fu Y, et al. Design and analysis of lumped resistor loaded metamaterial absorber with transmission band.” Optics Express 2012; 20: 28347.
Li S, Gao J, Cao X, et al. Wideband, thin, and polarization-insensitive perfect absorber based the double octagonal rings metamaterials and lumped resistances. Journal of Applied Physics 2014; 116: 043710.
Xu W, Sonkusale S. Microwave diode switchable metamaterial reflector/absorber. Applied Physics Letters 2013; 103: 031902.
Ho CP, Pitchappa P, Lin YS, et al. Electrothermally actuated microelectro-mechanical systems based omega-ring terahertz metamaterial with polarization dependent characteristics. Applied Physics Letters 2014; 104: 161104.
Zhang Y, Shi Y, Liang CH. A broadband tunable graphene-based metamaterial absorber. Optical Materials Express 2016; 6(9): 3036-3044.
